![background image](http://html.mh-extra.com/html/westfalia/abh-18/abh-18_original-instructions-manual_963624031.webp)
27
Safety Notes
Battery chargers are for indoors use only. Ensure that the
power supply and charger are protected against moisture at all
times.
When using the rotary hammer use safety equipment including
safety glasses and ear protection. Wear respiratory protection
suitable for the work being undertaken. If operating the tool
causes discomfort in any way, stop immediately and review
your method of use.
Use metal and voltage detectors to locate concealed electric,
water or gas lines. Avoid touching live components or conduc-
tors.
Ensure that the lighting is adequate.
Ensure that the drill bit is securely fixed in the chuck. Insecure
drill bits can be ejected from the machine causing a hazard
Ensure that the drill bit is not in contact with the workpiece
prior to starting up the tool.
Before drilling, check that there is sufficient clearance for the
drill bit under the workpiece.
Do not exert pressure on to the tool. To do so would shorten
its service life.
Drill bits get hot during operation, allow to cool prior to
handling them.
Never use your hands to remove sawdust, chips or waste
close by the bit.
If you are interrupted when operating the rotary hammer,
complete the process and switch off before looking up.
Where possible, use clamps or a vice to hold your work.
Examine the chuck regularly for signs of wear or damage.
Have damaged parts repaired by a qualified service centre
Always wait until the drill has come to a complete stop before
putting it down.
Periodically check all nuts, bolts and other fixings and tighten
where necessary.