7
Operation
Attention:
If you intend to clean watches or items that contain electronic
parts of any kind, make sure those items are appropriately
declared to be waterproof!
Operation
1. Switch on the oscillating cleaner by operating the ON/OFF
switch (3) to position
I
or
II
. Level
I
is meant for a low cleaning
intensity and level
II
for max. cleaning intensity. The control
light (4) turns on and indicates that the unit is operating.
2. To switch off the unit, slide the ON/OFF switch to the position
O
and pull the power plug.
Do not operate the oscillating cleaner for longer than 1 hour. It
is not intended for continuous operation. Do not use the
cleaning fluid more than three times! The used fluid contains
dirt particles which might damage sensitive surfaces.
3. Open the transparent lid and remove the objects that have
been cleaned. Thoroughly rinse the objects and dry well.
4. Empty the cleaning tank and thoroughly clean the unit itself.
Cleaning and Storing
Pull the mains plug from the wall socket.
Clean the oscillating cleaner after every use and ensure that
no objects remain in the cleaning tank. Do not clean the tank
with pointed or sharp objects or with objects that have a
sanding surface.
Do not immerse the oscillating cleaner in water and do not
clean it in a dishwasher.
Use only a moist cloth to clean the unit; do not use aggressive
chemicals, solvents or abrasives.
Store the unit out of reach of children.
