IV
Safety Notes
Do not subject the wall holder to loads over 35 kg.
Make sure the brackets have solidly locked into place and the turn knobs are
tight.
Make sure the item you intend to store sits solidly on the brackets and can not
fall down.
Mounting
The mounting surface should be flat and solid enough for screws and wall
plugs to hold.
Take the wall holder out of the package and attach the two pieces to each
other.
Flip the brackets down (90 degree angle) after loosening the knobs and
retighten the knobs.
Now you can hold the holder against the mounting surface and mark out the 4
mounting holes with a pencil or a screwdriver. To mount the brackets level, it is
advisable to place a bubble level across the brackets and move the holder
until the bubble level indicates it is level.
Use a suitable drill to drill the mounting holes and insert the wall plugs. Attach
the holder and tighten the screws.
Use
After installation the brackets can be set to the desired position after loosening
the knobs. Retighten the knobs.
Place the object you intend to store over the brackets (max. 35 kg).
Technical Data
Dimensions:
51 x 52/49.5 cm
Length of the Brackets: approx. 52 cm
Weight:
1.9 kg
Installation and Use