13
Operation
2. You may have to pump several times before a sufficient amount
of water comes out. Always make sure that there is enough
water in the water tank.
Dry Ironing
The iron can be used without water for dry ironing. Set the
steam control lever (3) to this position.
Cleaning and Storing
After use pull the power plug and drain remaining water from the
iron by turning it upside down.
After that, plug in and let the iron sit on its heel with the tempera-
ture control dial (8) in the MAX position for a few minutes to
evaporate remaining water from the steam system.
Wipe the iron with a lightly moistened cloth. Do not use aggres-
sive chemicals or abrasives to avoid damaging the surfaces.
Let the iron cool down completely before storing.
