Westfalia 84 58 92, Instruction Manual, Page: 33 / 50

29
Operation
Inserting the Battery into the Grass and Hedge Shears
1. Insert the battery into
the grass and hedge
shears by pushing the
battery all the way into
the battery slot.
2. For removing the
battery, simultaneously
hold both buttons on the
battery pressed and pull it out.
Switching ON and OFF
1. To turn the grass and
hedge shears on, first
press the safety switch
(3) inwards and then
depress the ON/OFF
switch (2).
2. To turn off the grass and
hedge shears, release
the ON/OFF switch.
Please note that the
blades will run for some
seconds after switching
off the unit. First wait for
the blades to come to
standstill and then place
the unit down.
Hints
Do not force the grass and hedge shears while trimming hedges or cutting
grass. Always use common sense during work.
Please observe the national regulations concerning noise protection. The use
of the garden tool is restricted on certain days (holidays) and at certain times
(noonday).
To avoid injuries preferably remove the battery from the unit when not in use
and after work.
(1)
3
2