10
Operation
Operating
1. To switch ON the stirring machine, press the ON/OFF trigger (5).
2. For switching OFF the stirring machine release the trigger. The more you
press the ON/OFF trigger the higher the speed will be.
Using the built-in speed controller in the ON/OFF trigger you can adjust the
revolution speed between 0 – 500 min
-1
.
3. If you want to use the stirring machine continuously, first press the ON/OFF
trigger and then the locking button (6).
4. To switch OFF the machine, depress the ON/OFF trigger fully and the locking
button will be released.
In order to stir the mass evenly with constant speed, it might be necessary to
readjust the revolution speed control during stirring by pressing the ON/OFF
trigger inwards. Lots of materials become highly viscous during stirring
process, so the rotation speed of the motor will decrease.
Hints for appropriate stirring of the used Material
Thoroughly stirring of the different
compositions that are nowadays in use,
prevents structural damage and expensive
follow-up costs. Therefore you should
observe some urgent basic rules.
Make sure the mass is mixed thoroughly.
Tough and weighty materials overcharge
drilling machines. Please utilise specially-
designed stirring machines for this purpose,
e.g. this, with optimally tuned revolution
speed and power transmission.
Please consider the flow direction when
selecting the agitator paddle.
Mix powdered materials from the bottom up,
and fluid material top-down or in parallel flow
direction. Immerse the mixing tool with
reduced revolution speed in order to prevent
splashing.
For your own safety, please wear goggles and, if necessary, a dust mask.
Never mix solvents with a flashpoint below 21° C. Please note processing and
safety instructions of material supplier.
