9
Assembly Instruction
Tools required for Assembling
10 mm & 13 mm wrenches or ratchet wrenches
cross-head
screwdrivers
Before assembling check the material for completeness (refer to overview).
Assembling
1. Place the worktop (11) upside down on a flat
level surface (e.g. workbench).
2. Put the washers (6xF) onto the corresponding
holes of the worktop and mount the two bear-
ings using the hex-head screws (6xM), the
washers (6xP) and the lock nuts (6xH)
(
figure 1
).
3. Insert the extensions (13) into the correspond-
ing slots of the table legs and screw the locking
levers (2xA) onto the extensions (
figure 2
).
4. Attach the two cross braces (12) and the tool
holder (6) using the cross-head screws (10xK),
the washers (10xP) and the nuts (10xO). This
way you assemble the tabletop support.
5. Now attach the upper cross brace using the
cross-head screws (4xL), the washers (4xP)
and the nuts (4xO) (
figure 3
).
1
2
3