16
Assembly and Using
Depending on the size of the saw blade the support arm and the position of
the motor must be adjusted.
The arm can be extended (step
1
+
2
) and turned after loosening the mounting
piece. The pin, on which the arm is mounted, can as well be moved on the
base plate (step
3
). This provides a wide range of possible adjustments for
every possible size of circular saw blade (90 – 400 mm diameter). The motor
can as well be moved on the base plate (step
4
), which is especially helpful for
large diameter blades.
With these adjustments you bring the saw blade into the right position to the
grinding stone. During grinding the grinding stone is moved back and forth
with the lever. During adjustment the lever must be swung up to move the
stone into the gap between the teeth.
1
2
3
4
Summary of Contents for 80 56 55
Page 5: ...III A G F E C B D H I bersicht Overview...
Page 29: ...23 Notizen Notes...
Page 30: ...24 Notizen Notes...
