Design protected by copyright
© Westfalia 05/10
Shutter On-wall Winder
Article No. 80 01 16
Article No. 80 01 16
Safety Notes
Make sure not to injure yourself while disassembling the old on-
wall winder. The drum is under tension.
Do not allow children to play with the on-wall winder.
Using
1. Close the shutter completely before
disassembling the old winder.
2. Release the shutter from the drive shaft.
3. Mount the new on-wall winder on the
wall or on the window frame.
4. Pull out approx. 3.5 m belt from the
winder and slide the belt through the
belt guide and into the roller shutter box.
Fasten the end of the belt.
5. Turn the drive shaft in order to wind the belt on the belt pulley.
Please observe the correct rotating direction. Finally mount the
shutter on the shaft.
Cleaning
When pulling the shutter up or down, make sure your hands are
clean in order not to soil the belt.
Clean the on-wall winder with a lightly moistened cloth only.
Aggressive cleaning agents may damage the surface.
Instruction Manual