10
Using
TARE
0
TMR
00:00
Weighing
1. Place the scale on a solid, level surface.
2. Press ON/TARE once. Wait until the display shows
0
(Zero). The scale is in
weighing mode.
3. Place the food on the weighing tray or preferably in a suitable bowl. The
weight is displayed. If you want to subtract the weight of the bowl form the
weight of the food, use the function Tare (see chapter Tare Function).
Tare Function
1. Switch on the scale, weigh the first food or the bowl
and leave the scale on.
2. Press the key ON/TARE to reset the display to
0
(zero).
3. Place the next food on the scale. The next weight will
be displayed. If necessary repeat these steps, by pressing the key ON/TARE
again.
Please note: By pressing the key ON/TARE, only the display will be rested to
0 (zero). The previously weighted value will remain internally. That means, if 1
kg is weighed you can only weigh 2 kg additionally. The max. weight is 3 kg –
105.8 oz.
Setting Timer
1. In time display mode, press the key MODE once to get
to the time setting mode. If the scale is in another
mode, press the key MODE several times until you the
Timer setting mode is displayed.
2. Hold the key MODE pressed for 3 seconds. The second digits are flashing.
Press the key UNIT several times until the desired time is adjusted. Up to 59
seconds can be set. If you hold the key UNIT pressed, the value will change
more rapidly.
3. Press the key MODE once more. The minute digits are flashing. Up to 99
minutes can be set. Press the key UNIT, to adjust the minutes. If you hold the
key UNIT pressed, the values will change more rapidly.
4. After setting seconds and minutes, press the key MODE once. If you only set
the second digits, press the key MODE twice to save the entries. Now the
timer function is activated and counts down.
