4
Safety Notes and Operation
Mounting the Unit
1. Mount the unit on the garage wall where you can see it from the driver’s
seat either directly or in the rear-view mirror.
2. Use screws and wall plugs if necessary.
3. Mount the sensor on the wall in the same height as the car bumper. Use
either a screw or the included Velcro patch.
Start-Up and Operation
1. Set the ON/OFF switch to ON.
2. When a solid object approaches the sensor, the lights light up as follows:
Colour Distance
Green
61 – 100 cm
Yellow
41 – 60 cm
Red
less than 40 cm
After 12 seconds without movement the unit turn off and will turn back on
upon movement.
Technical Data
Type RP-338
Batteries
3 x LR6 (AA)
Weight 158
g
Power Mains Adaptor Type
AD23901-28
Input Voltage
230V~ 50Hz
Output Voltage
9V 100 mA
Protection Class
II
