3
Operation
How to use the heating cushion
•
Remove all packaging from the heating cushion and refuse the packaging
or store it a safe place out of reach of children. There is danger of
suffocation!
•
Place the heating cushion on the car seat and fasten it with the elastic
straps and included hooks.
•
Connect the power cable to the cigarette lighter of your car. Make sure the
on-board voltage is 12 V. A lighting LED on the plug shows that voltage is
on and the adapter fuse is working.
•
The heating cushion is equipped with two heating levels. Turn the switch to
“HI” to operate the cushion on a high heating level and to “LO” to choose
lower heating. By switching “OFF” the heating cushion goes out.
•
If the seat and the backrest of the heating cushion do not become warm
after a short time, check the fuse in the cigarette lighter and the fuse in the
power plug of the unit. If damaged, replace with a fuse of the same type
and dimensions.
•
If you do not need the heating cushion, pull the power plug and allow the
unit to cool down. Fold up the cushion and store it, to protect it from dust in
the provided bag. Store the heating cushion in a dry and cool place.
Attention:
The inside thermostat will cut off the heating process at a temperature of
65°C ± 5. Heating will start again if the temperature arrives 45°C ± 5°C
Change the Fuse