Design protected by copyright
© Westfalia 02/16
Drill Pump
Instruction Manual
Article No. 31 52 42
Intended Use
For pumping water (dirt water with small
particles) alkaline solutions, diesel oil etc.
Not suitable for pumping liquid foodstuffs,
alcohol, petrol etc.
Intended for operation in clockwise
rotation. Please also observe the pumping
direction arrow on the pump.
Conditions for the Use of the Drill Pump
Suitable for fixing to a drill with 43 mm Euro spindle collar.
Before first use it is necessary to fill the pump with liquid! Afterwards
the pump is self-priming.
A stationary mounting of the pump is also possible.
Fittings: With threads for hoses and with 2 fittings for quick coupling
Gardena system, 1/2" + 3/4".
Technical Data:
Material: Sturdy Polyamide housing, Rotor made of chemical-resistant
nitrile rubber
Max. Temperature for the fluid to be pumped: 80° C
Motor Power of the drill: At least 900 Watt
Drill Chuck: 43 mm Euro Spindle Collar, not for keyless Chuck!
Drive Shaft: 8 mm (just fix to the drill chuck)
Flow Rate approx.: 3000 Litres per hour
Suction Height approx.: 3 meters
Max. Pumping Pressure approx.: 3 bars
Dry Running of the Pump max.: 30 seconds
