8
Juicer
Before first Use
Clean all parts of the unit before using the first time as described below under
“cleaning” on page 11.
Assembling and Operating the Juicer
1. Place the motor unit (7) on a steady and level surface. To avoid personal
injury never touch the blades when handling the accessories, during opera-
tion or on the assembled unit.
2. Place the juice blade holder (4) on the motor unit (7) with the effusion opening
(15) into the suitable notch of the motor unit.
3. Insert the juicing blade (3) into the juice blade holder (4) and turn the holder
slightly to the left or right until the holder locks into the drive shaft (5).
4. Place the funnel lid with splash guard (2) on the juice blade holder. The
splash guard has to be in the direction of the effusion opening (15).
5. Close the funnel lid with the both locking lever (6) that are situated on the
motor unit.
Tilt the locking lever (6) backwards, in direction to the residue container (10),
to open and remove the funnel lid (2). The unit is equipped with an automatic
safety system. The motor does not rotate if the funnel lid with splash guard (2)
is not completely fixed with the locking lever (6).
6. Place the residue container (10) with the waved side under the guard of the
juice blade holder (4) in order to hook the residue container.
7. Place the juice collecting tank (9) with its lid under the effusion opening (15).
8. Plug the power plug in a wall socket. The settings on the rotary switch (8) are
for the following usage:
P = Short Pulse Operation
0 = Stop
1 = Low Speed
2 = High Speed
