![background image](http://html1.mh-extra.com/html/westfalia/26-03-49/26-03-49_instruction-manual_962942012.webp)
7
Chapter 1
Operating the Cordless Reciprocating Saw
Use only blades that are intended
for sawing the material. Make
sure that the tip of the blade does
not thud on the work piece. This
can break the blade. Attach the
saw onto the work piece so, that
the guide shoe lies on the work
piece. Only than, switch the
reciprocating saw on and start
sawing.
Maintenance and Cleaning
Always remove the battery during maintenance. If necessary, clean the device with a
moistened cloth. Do not use chemical detergents that contain aggressive agents such
as benzene, thinner or similar as they can damage the housing. Make sure the air
vents are always clean and free from dust.
This device does not need maintenance or lubrication; only oil the blade holder from
time to time.
Under careful treatment you can charge the battery up to 500 times. After ageing the
capacity of the battery can slow down. If required, order a second battery.
In case of technical damage of the cordless reciprocating saw or the charger, have
them repaired by a qualified technician or contact your customer service.