7
Using
Before Use
Remove all packaging from the unit. Do not leave packaging materials lying
around; plastic bags may become a deadly toy for small children.
Clean all parts as described in the chapter “Cleaning”. Keep the milk frother clean
at all times as the unit comes into contact with food.
Please read this manual carefully and use the unit only according to this manual.
Assembling
1. Insert the agitator (6) into the agitator holder (7). To remove
the agitator, grasp the agitator in the middle and pull outwards.
2. Connect the power plug of the base (5) with a wall socket.
3. Place the milk frother flush on the base.
Using the Milk Frother
1. Pour the milk into the container.
Pay attention to the lower max marking (A) if
you intend to produce foamed milk.
2. Close the lid and press the ON/OFF button (4)
once. The LED shines while the unit is
operating.
3. The heating plate in the base heats up and the agitator starts rotating. The
milk will be warmed up and foamed. After approx. 1 minute the milk frother will
reach the preset temperature of 70°C and automatically turns off.
4. Leave the lid closed all the time in order to avoid splashes. Attention, hot
liquids! Be careful when pouring out the liquid in order not to burn yourself. For
removing foamed milk with firm consistency, use suitable cutlery made of
wood or plastics in order not to damage the coating inside the container.
5. If the milk frother is still hot and you press the ON/OFF button once more
within a short time, the LED will flash for some seconds and turns off. Allow
the milk frother to cool down for some minutes before using it again.
A
