1
Instructions for artificial PE-Christmas wreath approx. 45 cm
diameter (for indoor use) with LED lighting.
This wreath is exclusively designed for use in dry interiors
The scope of delivery consists of the artificial wreath (PE injection moulding) with LED-string
of lights (20 LEDs), a mains adapter, a battery box and a coupling cable (to connect
the mains adapter with the battery box when using rechargeable batteries).
1.) After you have taken the wreath out of the packaging, the branches can be
trimmed as wished for visual design.
2.) To use the lighting either the mains adapter supplied can be used by
connecting to a 230 V power supply or the battery box provided for three 1.5 V
AA batteries (batteries not included in scope of delivery). Hereby the following
should be noted:
When operating with mains adapter:
Only connect the string of lights of the wreath to a socket which is protected
by a circuit breaker!
- Before start up, check the string of lights for damages
- After connecting the feed cable with the plug, the LEDs attached to the
wreath will light up
While doing so please ensure that the cable does not pose a trip hazard!
In the case of battery box operation:
- Before start up, check the string of lights for damages
- To insert the batteries into the battery box, open the screws on the box
- After inserting the three 1.5 V AA batteries, screw the battery box down
again
- To use the lighting, press the on/off switch on the battery box
- If using rechargeable batteries, these can be charged up using the
connecting cable and mains adapter provided
- To this end, proceed as described below:
- Before connecting the mains adapter to the mains, connect the mains
adapter to the battery box using the coupling cable provided
- Only then connect the mains adapter to a socket protected by a circuit
breaker
- You have now started the charging process for the batteries
You must adhere to the battery manufacturer's information regarding the
permitted charging time for the batteries.
