Caution!
The Pixo C2 USB connector can not be used for data
transfer. It is only a power connector with a limited
output power. The maximum ratings are 5.3 V with 500
mA. This output power is not suffi cient for devices with
a built-in hard disk drive. Hard disk drive based devices
have a peak power consumption of more than 1000 mA.
LED functions
The green LED indicates only the NiMH / NiCd and Li-Ion
charge process. It does not indicate any activity on the
USB power connector.
C H A R G E
green
P O W E R
red
Off
Off
No or faulty power supply.
Flashing
On
Charge process is going on.
On
On
Battery fully charged.
Off
On
Main power from power supply
or car cigarette lighter plug ok.
No battery pack inserted. Faul-
ty contact. Wrong or faulty bat-
tery pack.
Flashing
Flashing
Charge process was stopped by
10 hours safety timer.
Battery pack could not be fully
charged. Battery pack faulty.
Process error. Remove batte-
ries and try again.