24
Cleaning the Accessory
Cleaning the Suction Hose
1. To thoroughly clean the suction hose from
blockages you can disconnect the hose from
the vacuum cleaner.
2. To disconnect the hose, press both
releasing buttons (position of the releasing
buttons see arrows) simultaneously and pull
off the hose.
3. Thoroughly clean the hose and remove dirt
particles. Also clean the suction opening of
the vacuum cleaner.
4. Reinsert the hose into the suction opening
and press the hose firmly against the
adaptor. The releasing buttons of the
suction hose will audibly snap in place.
Cleaning the Bottom Suction Opening
1. If necessary you can detach the
suction hose of the bottom suction
opening. By doing this you can easily
remove lint balls or large objects that
have been sucked by mistake.
2. Unscrew the four screws and
thoroughly clean both openings.
3. Reattach the suction hose in reverse
order and tighten the screws. Screw
the screws only hand tight.