Document: 1862en08.doc
WESTERSTRAND
Author: Tan
Date: 2014-07-08
Page: 9 of 16
WESTERSTRAND URFABRIK AB
P.O. Box 133
Tel. +46 506 48000
Internet:: http://www.westerstrand.se
SE-545 23 TÖREBODA
Fax. +46 506 48051
E-mail:
Synchronisation
Stand-alone
If the clock does not have an external synchronisation, it operates Stand-alone.
Minute impulse
Make the strapping according to the drawing for strapping page 7.
Connect the minute impulse wire according to the schema page 6.
The clock can be set in synchronisation or slave mode.
Synchronisation mode:
Set the clock for synchronisation, mode InSy See programming page 11.
Set time and wait for next minute impulse. The clock will be synchronised
Slave mode:
Set the clock for slave, mode InSL See programming page 11.
Set time and wait for next minute impulse. The clock operates as a slave clock.
TC
Check the strapping according to the drawing for strapping page 7.
Connect the TC wire according to the schema page 6.
Set the clock for synchronisation, function DCF See programming page 11.
When a correct time message appears the clock sets the time.
The clock will blink colon when it is in sync and accepts transmitted code.
DCF
Check the strapping according to the drawing for strapping page 7.
Connect the DCF wire according to the schema page 6.
Set the clock for synchronisation, function DCF See programming page 11.
When a correct time message appears, the clock sets the time.
The clock will blink colon when it is in sync and accepts transmitted code.
