WESTERSTRAND LED190 BASIC, Operation Instructions Manual

Page: 16 / 18

WESTERSTRAND SPORTSYSTEM
Dokument: 4253en08.docx
Författare: CF
BASIC 190/250
Datum: 2019-11-19
Page: 16 av 18
Operation Instructions
WESTERSTRAND URFABRIK AB
Box 133 Tel. 0506 48000 Internet: http://www.westerstrand.se
545 23 TÖREBODA Fax. 0506 48051 E-Mail: info@westerstrand.se
Startup and Configuration
Turn on power to the scoreboard. Connect the wired remote control to the connection box or turn on the radio
remote control. At startup, the available sports are shown in the remote control display. If more than 8 sports are
available, a button named [Next] will be shown. Press [Next] to show the next 8 sports.
There is also a [Menu] button in the start screen. Press [Menu] to change the settings of the remote control.
Select Extra Modules
If there are extra modules to show penalties, fouls or player scores, they must be activated in the remote control.
This is normally set at delivery. Select [Modules] to activate or inactivate a module. The following modules
exist:

Penalty Module – Module for showing individual penalties.

Foul Module – Module for showing individual fouls.

Player Stats Module – Boards for showing player score in basketball and handball. If player score shall
only be shown in basketball, the module can be inactivated in the sport settings for handball by
selecting [Menu]

[Sport Settings]

[Handball]

[Player Stats Module].
Depending on which modules are activated, different functions are available in the remote control.
Under the modules settings, the system type, ”Basic LED190/250” or ”Basic LED300”, can be set. This is set at
delivery and should not be changed.
Real-Time
Press the [Real-Time] button to change the settings for real-time. The following choices are shown:

Set Real-Time: Press to set the real-time.

Show: Show the real-time on the scoreboard.

Hide: Remove the real-time from the scoreboard.

Automatic display on: The real-time will automatically be shown on the scoreboard 8 seconds after the
remote control has been turned off or unplugged.

Automatic display off: Inactivates the automatic display of real-time.
Change Language
To change the language, press button [Change Language] and then select the correct language. This is normally
set at delivery.