WESTERSTRAND
Document: 1853en08.doc
Author: Tan/CF
Date: 2013-09-05
Page: 3 of 7
WESTERSTRAND URFABRIK AB
P.O. Box 133
Tel. +46 506 48000
Internet:: http://www.westerstrand.se
SE-545 23 TÖREBODA
Fax. +46 506 48051
E-mail:
Installation
Mechanical installation
1.
Mark and drill holes for the bracket in the wall or ceiling.
2.
Pull the cable through the bracket plate.
3.
Fasten the bracket plate to the wall or ceiling with screws suitable for the wall or ceiling material.
4.
Be sure to tighten the screws carefully and check the stability of the bracket.
Note! If not correctly attached the bracket can cause damages!
Electrical installation
Note! The clock has to be mounted with an external safety switch
Note! Always use cables of sufficient size and suitable for the intended environment.
1.
Loosen the screws holding the clock side.
2.
Open the clock side and disconnect the cable for the movement.
3.
Connect cables for the illumination and electronics according to the connection label.
4.
Connect the cable for the movement.
5.
Remount the clock side. Make sure that the plug-in cables are not getting jammed or leaned on the dial.
6.
Turn on the mains for the clock.
