Lit. No. 94417/94418, Rev. 08
9
August 10, 2005
5. Insert a hold-down pin on each side and secure with
hairpin cotter pin.
6. Connect the spreader wiring harness to the vehicle
wiring harness.
NOTE: Grease all electrical connections with
dielectric grease.
7. Verify vehicle stoplights and spreader center high
mounted stoplight are working properly.
MOUNTING THE SPREADER
Spreader Wiring Harness
Vehicle Wiring Harness
CAUTION
Both hold-down pins must be in place and
secured with hairpin cotter pins. The hopper
assembly may become unstable if the pins are
not properly secure while the vehicle is in
motion. Never use a finger to check alignment.
Hairpin Cotter
Pin
Hold-down
Pin
Summary of Contents for PRO-FLO 2
Page 27: ......
