Western DEFENDER Owner'S Manual Download Page 25

Page: 25 / 32

Lit. No. 72451, Rev. 03

October 15, 2019

6. Place the electrical plugs into the storage boot on

the snowplow.

7. The receivers can be detached from the vehicle,

if desired, by removing the two 1/2" x 4" pins that

attach the receivers to the mounts.

DETACHING SNOWPLOW FROM VEHICLE

DETACHING THE SNOWPLOW

1. With the blade straight, lower the snowplow to the

ground. Activate FLOAT mode, then turn the plow

control OFF. Apply the vehicle parking brake.

2. Unplug the electrical harness.

NOTE: After each disconnection of the snowplow,

reapply dielectric grease to the electrical plugs to

maintain the protective coating on the terminals.

3. Pull the stand lock pin out and let the stand drop

to the ground. Release the stand lock pin. Verify

that the stand is locked by trying to lift the stand.

4. Pull both connecting pins outward and rotate to

lock into the receiver notches.

5. Back the vehicle away from the snowplow.

WARNING

Keep 8' clear of the blade when it is being

raised, lowered, or angled. Do not stand

between vehicle and blade or directly in front

of the blade. If the blade hits or drops on you,

you could be seriously injured.

WARNING

Inspect snowplow components and fasteners

for wear or damage whenever attaching or

detaching the snowplow. Worn or damaged

components could allow the snowplow to

drop unexpectedly.

1/2" x 4" Pins

with Cotters

Passenger-side

receiver shown.

Blade

Stand

Connecting

Pin

Receiver

Headgear

Slot

Rear

Receiver

Pin

Locking

Hole

Connecting

Pin Hole

Stand Handle

Stand

Lock Pin

Receiver Notch

Connecting Pin

Summary of Contents for DEFENDER

































Search results

Summary of Contents for DEFENDER

Reviews:

Related manuals for DEFENDER

Brands by name

Popular brands

Western DEFENDER, Owner'S Manual

Search results

Summary of Contents for DEFENDER

Reviews:

Related manuals for DEFENDER

Brands by name

Popular brands