Lit. No. 78532, Rev. 02
17
March 15, 2019
OPERATING YOUR SNOWPLOW
Clearing an Established 4-Digit
Security Code
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position.
2. If the snowplow is locked (the control power
indicator light will be
fl
ashing rapidly), unlock
the snowplow by following the Manual Unlock
procedure described above.
3. Move the ON/OFF switch to the "OFF" position
or push the ON/OFF button to switch the control
OFF. Verify that the power indicator light is OFF.
4. With the control OFF, move the control lever
to the #2 position or press the #2 button four
consecutive times, then move the lever to
the #3 position or press the #3 button four
consecutive times. This sequence (2, 2, 2, 2, 3, 3,
3, 3) will clear the 4-digit security code from the
SECURITY GUARD™ system. The FLOAT light
will
fl
ash to indicate that the 4-digit security code
was cleared.
NOTE: To enter a new 4-digit security code, see
"Activation & Establishing a 4-Digit Security
Code."
Light Flash Indicators
POWER – Red
Function
OFF
Control is OFF
Solid ON
Control is ON and active
Slow Flash
No communication
Fast Flash
Snowplow is locked—enter 4-digit
security code to unlock
FLOAT – Green
Function
Solid ON
FLOAT function is active
Fast Flash
Security code activation in progress
Additional Notes
• The SECURITY GUARD system requires any
control (other than the one with the assigned
4-digit security code) to enter the security
code before the snowplow can be activated.
Once the security code is established, the
SECURITY GUARD system recognizes when a
control with the same security code is attached,
and does not require a manual unlock to activate
the snowplow. The system will recognize the
control as "safe" and will automatically unlock.
• In the event that a snowplow is locked and cannot
be manually unlocked or reset, contact your
Authorized Dealer.
• REMINDER: Record your security code for future
reference.
