Lit. No. 96452, Rev. 02
2
March 5, 2007
96462, 96500, 96600
Western Products reserves the right under its product improvement policy to change construction or design details and furnish equipment when
so altered without reference to illustrations or specifications used. Western Products or the vehicle manufacturer may require or recommend
optional equipment for snow removal. Do not exceed vehicle ratings with a snowplow. Western Products offers a limited warranty for all snowplows
and accessories. See separately printed page for this important information. The following are registered (
®
) or unregistered (™) trademarks of
Douglas Dynamics, L.L.C.: MVP
®
, MVP PLUS™, WESTERN
®
, WIDE-OUT™.
Printed in U.S.A.
RAISE
ON/OFF
FLOAT
RAISE
ON/OFF
FLOAT
SCOOP
VEE
WIDE-OUT
MVP PLUS & MVP
S C
O O P
R
E T R ACT
LOWER
R
L
LOWER
R
L
WING
WING
WIDE-OUT
MVP PLUS & MVP
WING
WING
Control Functions
Raise, Lower, Float, Angle
The four diamond-shaped buttons in the center of the
control face, when pressed, will result in the following
blade movements:
NOTE: If control function times out before desired
blade movement is complete, release button and
press again.
Function
Description of Operation
L WING
Press this button on left side of control to move left
wing. The first time button is pressed after control
is turned on, or another function is used, wing will
extend. Repeated use of the same button, without
using another function, results in movement in
opposite direction from previous movement.
Function times out after 3.25 (WIDE-OUT – IN),
3.75 (WIDE-OUT – OUT), 3.0 (MVP PLUS) or
5.5 seconds (MVP).
R WING
Press this button on right side of control to move
right wing. The first time button is pressed after
control is turned on, or another function is used,
wing will extend. Repeated use of the same
button, without using another function, results in
movement in opposite direction from previous
movement. Function times out after
3.25 (WIDE-OUT – IN), 3.75 (WIDE-OUT – OUT),
3.0 (MVP PLUS) or 5.5 seconds (MVP).
Function
Description of Operation
SCOOP
Press this button to extend both wings forward
into scoop position. Function times out after
5.5 (WIDE-OUT & MVP) or
5.0 seconds (MVP PLUS).
RETRACT
(VEE)
Press this button to draw both wings into the
fully retracted (vee) position. Function times out
after 4.5 (WIDE-OUT), 3.0 (MVP PLUS) or
5.5 seconds (MVP).
Function
Description of Operation
RAISE
Press this button to raise snowplow and cancel
FLOAT mode. Function times out after
3.5 (WIDE-OUT), 4.0 (MVP PLUS) or
3.0 seconds (MVP).
LOWER
Press this button to lower snowplow. Release
button to stop blade at desired height.
FLOAT
Press
LOWER
button and hold for 3/4 second to
activate this mode. FLOAT indicator light in
upper left corner of control face will illuminate.
Blade will lower to ground surface and follow
contour of surface as it dips or raises. Function
does not time out; however, control will shut
down after 20 minutes of nonuse.
Press
RAISE
button momentarily to cancel
FLOAT. Angling left or right will interrupt (stop)
FLOAT function (MVP only), but FLOAT will
resume when angling is complete.
L
(Angle
Left)
With wings in a straight line, press
L
button to
move both wings to angle left position. Left wing
retracts while right wing extends to cast snow to
driver's left side. Function times out after
3.25 (WIDE-OUT), 3.0 (MVP PLUS) or
5.5 seconds (MVP).
R
(Angle
Right)
With wings in a straight line, press
R
button to
move both wings to angle right position. Right
wing retracts while left wing extends to cast
snow to driver's right side. Function times out
after 3.25 (WIDE-OUT), 3.0 (MVP PLUS) or
5.5 seconds (MVP).
RAISE
LOWER
R
L
ON/OFF
FLOAT
RAISE
LOWER
R
L
ON/OFF
FLOAT
SCOOP
WING
VEE
WING
S C
O O P
WING
R
E T R ACT
WING
WIDE-OUT
MVP PLUS & MVP
Float
Light
(green)
Scoop/Retract (Vee) Blade Position
The two round buttons located to the left and right of
the RAISE button move both wings at the same time
into the following blade positions:
Wing Positions
The two round buttons located to the left and right of
the LOWER button move either wing independently of
the other as described below.