WE-7 Operating Instructions
7
Instruments warranty shall overlook normal wear, however does not include
operation outside the environmental specification of the product. All warranty
work is FOB Western Instruments, and any returned units shall include a written
description, by the end user, of the fault.
Western Instruments makes no other warranty, either expressed or implied, with
respect to this product. Western Instruments specifically disclaims any liability
arising form the use of this equipment. For the correct use of the product, refer
to the Operating Instructions, furthermore we recommend instructional training to
CGSB, ASNT, or other regulatory authority qualifications. Western Instruments
highly recommends the end user exercise all possible safety precautions,
including use of protective equipment, while operating this or other industrial
equipment.
Specifications:
Models WE-7 or WE-7K
Voltage: 115VAC or 230VAC
Frequency: 50 or 60 Hz
Current: 4 Amps @ 115 Volts, 2 Amps @ 230 Volts
Controls: Switch, DC via SCR and Phase Angle Control
Capacity: AC - <10 Pounds (4.6 kg)
DC - <50 Pounds (23 kg)
Pole Spacing: 0 – 11” (0 – 280mm)
Pole Cross Section 1” (25mm)
Weight: 7.5 Pounds (3.4 kg)
Western Instruments Inc.
Western Instruments Inc.
Western Instruments Inc.
Western Instruments Inc.
Phone: (780) 459-6720
Fax: (780) 459-7837
E-mail: info@westerninstruments.com Web: www.westerninstruments.com
