Western Global TRANSCUBE GLOBAL 05TCG-EU, Instruction Manual

Page: 3 / 32

2
TECHNICAL SPECIFICATION
The dimensions and weights stated in this specification table are approximate and may
very slightly from the unit you have.
MODEL
CAPACI
TY
DIMENSIONS (mm) WEIGHT (kg)
- Litres Length Width Height Unladen Laden
05TCG-EU 500 1150 1150 838 437 862
10TCG-EU 950 1150 1150 1320 514 1377
20TCG-EU 2000 2300 1150 1320 865 2665
30TCG-EU 3000 2300 1550 1320 992 3692
GENERAL SAFETY
Before using this equipment and to avoid personal injury, carefully read and understand
these instructions. If there is anything you do not understand, contact the supplier for
advice.
This IBC must not be moved, filled, maintained or operated by persons who are under the
influence of alcohol or drugs, tired or unwell.
You MUST perform a risk assessment before using this equipment to ensure your safety and
the safety of others.
Wear the correct Personal Protective Equipment for the task you are performing.
Wear gloves when handling this equipment. Wear suitable clothing.
Steel toecap boots must be worn. If appropriate, wear a hard hat.
Do not wear loose jewellery or clothing that may get in the way or become trapped in the
mechanism.
Inform everyone in the work area of what you are doing.
Inspect the IBC before use, if there is any doubt about its condition, DO NOT USE IT.
Western Global consider the corner brackets come under the definition of lifting points and
as such are part of the load (LOLER: ACOP 124).
LIMITATIONS OF USE
The IBC is designed for the safe storage of diesel fuel / heavy oils whilst on site or during
transportation. Each unit is capable of storing up to a maximum of 95% of its stated total
capacity, please see ‘Technical Specifications’ for details of the model you have.
SAFE PRACTICE / RULES AND REGULATIONS
The storage, transportation and dispensing of diesel fuel is governed by law and it is the
user / operator who has sole responsibility to ensure that any such rules and regulations
are abided by.