Installation Guide
Western Digital Corporation
1-3
Figure 1-2. Connect Pin 1 to Pin 1
Drive 2 Cable Installation
Attach the interface cable 40 pin connector from the second drive
to J2 on the adapter board. Attach Pin 1 to Pin 1. See Figure 1-2.
2.
Connect cable(s) from drive unit to WDXT-150 adapter board.
Note: The WDXT-150 supports only one intelligent hard disk
drive.
Drive 1 Cable Installation
Attach the interface cable 40 pin connector from the drive to J2A
on the adapter board. Attach Pin 1 of the cable connector to Pin 1
on the adapter board. See Figure 1-3.
The WDXT-150 has a power connector, which can supply power
to the drive. This connector is located in the lower corner of the
board. See Figure 1-3. If you have no other way of connecting
power to your intelligent drive, then connect the drive power
cable to this connector.
