background image

6

4079-001056 Rev. A  5/97  H0310

RELATED DOCUMENTS

To obtain these reference documents, call Western Digital at 714-932-5000,
or download them from the Western Digital web site.

n

WDE2170/WDE4360 Installation Guide (4079-001046)

n

WDE2170/WDE4360 Technical Reference Manual (4079-001045)

n

Western Digital 3.5-Inch Drive Handling Guide (79-000563-003)

n

Western Digital SCSI Implementation Guide (4096-001116)

TECHNICAL SUPPORT

Phone Assistance:

507-286-7972

U.S. only:

888-WDC-SCSI or 888-932-7274

Fax Assistance:

507-286-7926

If you need additional information or help during installation or normal use
of our products, contact Western Digital Technical Support. Our customer
support staff will answer your installation questions by phone. When calling
for support, please have your Western Digital hard drive serial number and
model number available.

BULLETIN BOARD SERVICE (BBS) 24-HOUR

North America only: 

714-753-1234

Germany:

49-89-92 20 06-60

U.K.:

44-1372-360387

You may access the Technical Support Bulletin Board if you have a Hayes-
compatible modem with a 2,400 to 28,800 baud rate. The required format is:
8 data bits, 1 stop bit, no parity.

DOCUFAX (24-HOUR)

North America only: 

714-932-4300

Europe Only:

31-20-4467650

Use the automated FAX system to have product information sent directly to
your FAX machine.

ONLINE SERVICES

Online services include general product and contact information, installation
guides, and frequently asked questions.

Internet:

www.wdc.com

FTP Site:

ftp.wdc.com

America Online:

Keyword: WDC

Western Digital

8105 Irvine Center Drive
Irvine, CA 92618

Western Digital is a registered trademark and WD Enterprise and FIT Lab are trademarks of Western Digital Corporation. 
Other marks that belong to other companies may be mentioned herein. Product specifications subject to change without notice.  © 1997 Western Digital Corporation. All rights reserved.

Summary of Contents for WDE2170







Reviews: