Western Digital scorpio black mx320s-1 Technical Reference Manual Download Page 17

WD Scorpio ML320S-AF2

Specifications

2679-771320-A00

RELEASED 4/7/11 (WD CONFIDENTIAL)

9

Drives are tested by applying a random or swept sinusoidal excitation in each linear axis, one axis at a 
time. The drive incurs no physical damage when subjected to continuous vibration not exceeding the 
level listed in Table 2-1.

Drive Generated Vibration

Drives are tested by supporting a single drive horizontally in a free-free state and measuring the side-to-
side vibration. Self vibration may not exceed the level listed in Table 2-1.

Rotational Shock Non-Operating

Drives are tested by applying a rotational force centered around the actuator pivot. The drive incurs no 
physical damage when subjected to the rotational force specified in Table 2-1.

Packaged Shock and Vibration

The shipping packaging is designed to meet the National/International Safe Transit Association (N/
ISTA) standards for packaged products. The drive incurs no physical damage when subjected to the N/
ISTA standards.

Summary of Contents for scorpio black mx320s-1




























































Reviews: