15
6644-2240
LED indicators
Indicators
(LED)
Power (PWR)
Link (LINK) of every port
Speed (SPD) and duplex (DPX) of TX ports
LED
Status
Description
PWR
ON
Internal power, initialising OK
Slow flash
Initialisation progressing
Fast flash
Initialisation error
LINK/SPD
OFF
No Ethernet link
ON
Good Ethernet link
Flash
Ethernet data is transmitted or received, traffic indication
Flash 3 Hz
10 Mbit/s
Flash 6 Hz
100 Mbit/s
Flash 12 Hz 1000 Mbit/s
DPX
OFF
Half duplex
(TX only)
ON
Full duplex
SFP Transceivers
The unit supports Westermo labelled transceivers only. See Westermo's modular
transceivers datasheets 100 Mbit and 1 Gbit for supported SFP transceivers. See
Transceiver User Guide "6100-0000" for transceiver handling instructions.
www.westermo
.com – A Beijer
Electronics Gr
oup Compan
y
Gigabit Transceiv
ers
RedFox, Lynx series and OD
W-700 series
The Westermo
range of Small
Form-factor
Pluggable (SFP)
transceivers
covers versions
suitable for Gigabit
applications.
LC connector
s are used as
standard due
their small siz
e.
These transceiv
ers have been
verified to meet
the Westermo
environmental
specification
and can oper
ate in a range
of different W
estermo products
in harsh industr
ial applications.
The transceiv
ers are coded
to allow confir
mation that
certified versions
have been installed.
Versions are a
vailable with diff
erent wave length
including 1550
nm for extreme
distances upto
120 km (74.5
mi)
and 1310 nm
version for both
single (9/125)
and multimode
cables (50/125
and 62.5/125).
In applications
where only
a single fibre
core is availab
le a Bi-Directional
(BiDi) transceiv
er can be used.
…
Wide choice
to provide optimal
solution
• 1000 Mbit/s
versions
• Standard LC
connector type
…
Verified to meet
Westermo en
vironmental specifications
• Temperature
range –40 to
+85°C (–40
to +185°F)
• Coded to guar
antee quality
…
Different transciv
ers for many
solutions
• Multi mode
fibre up to 2
km (1.2 mi)
• Single mode
fibre up to 120
km (74.5 mi)
• Bi-directional
fibre transciv
ersup to 120
km (74.5 mi)
• Gbit copper
transceivers
EN 60825-1
Eye Safety: Class 1 laser pr
oduct complies
Component Recognition
RX
TX
Interfaces
How far can
we get with
transceivers
The different
transceiver options
are marked with
an
indicative range
as a part of the
transceiver descr
iption.
This is the specified
distance when
the transceiv
er is used
in Gbit applications.
For the ODW
series the maxim
um distance (km)
can be
calculated with
the formula:
Power budget
(dB) – signal
loss (dB) / fibre
attenuation
(db) per km.
Signal loss = splice attenuation x number of s con
-
nector attenuation x number of connector
s + safety mar
gin.
Splice, connector and fibre attenuation can be f
ound on article
data sheets.
By calculating
the maximum
distance based
on power
budget a LC2
multimode tr
ansceiver can
operate
up to 5 km (3.1
mi).
Transceivers 1Gbit_1509_EN_REV
. B
www.westermo
.com – A Beijer
Electronics Group
Company
100 Mbit Transceiv
ers
RedFox, Lynx series and OD
W-700 series
The Westermo range
of Small Form-factor
Pluggable (SFP) transceiv
ers covers versions suitab
le for 10/100 Mbit/s
applications. LC connector
s are used as standard
due their small size.
These transceivers hav
e been verified to meet
the Westermo environmental
specification
and can operate in a range
of different Wester
mo products in harsh industr
ial applications.
The transceivers are coded
to allow confirmation
that
certified versions have been
installed.
Versions are availab
le with different wave length
including 1550 nm for extreme
distances upto 120 km
(74.5 mi)
and 1310 nm version
for both single (9/125)
and multimode
cables (50/125 and 62.5/125).
In applications
where only
a single fibre core is availab
le a Bi-Directional
(BiDi) transceiver can
be used.
…
Wide choice to provide
optimal solution
• 100 Mbit/s versions
• Standard LC connector
type
…
Verified to meet Wester
mo environmental
specifications
• Temperature range
–40 to +85°C (–40
to +185°F)
• Coded to guarantee
quality
…
Different transcivers fo
r many solutions
• Multi mode fibre up
to 2 km (1.2 mi)
• Single mode fibre
up to 120 km (74.5
mi)
• Bi-directional
fibre transciversup to 120
km (74.5 mi)
• 100 Mbit copper
transceivers
EN 60825-1
Eye Safety: Class 1 laser pr
oduct complies
Component Recognition
RX
TX
Interfaces
How far can we get
with transceiv
ers
The different transceiv
er options are marked
with an
indicative range as a par
t of the transceiver descr
iption.
This is the specified
distance when the transceiv
er is used
in 100 Mbit applications.
For the ODW series the
maximum distance
(km) can be
calculated with the for
mula:
Power budget (dB) – signal
loss (dB) / fibre atten
uation
(db) per km.
Signal loss = splice attenuation x number of s con
-
nector attenuation x number of connector
s + safety margin.
Splice, connector and fibre attenuation can be f
ound on article
data sheets.
By calculating the maxim
um distance based on
power
budget a LC2 multimode
transceiver can oper
ate
up to 5 km (3.1 mi).
Transceivers 100Mbit_1510_EN_REV
. B
ESD Protection
www.westermo.com
©
W
estermo
Teleindustri
AB
User Guide
6100-0000
SFP
Transceivers
