18
6650-2260
Configuration
All needed configurations and parameter settings are done by the DIP-switches, located
under the top lid of the LRW-112 (LRW-112PP).
!
DIP-switch settings
Before DIP-switch settings:
Prevent damage to internal electronics from electrostatic discharges (ESD) by
discharging your body to a grounding point (e.g. use of wrist strap)
Note:
Disconnect power before DIP-switch settings.
S2
S1
S1 DIP-switch
ON
1 2 3 4 5 6 7 8
Not used
S2 DIP-switch
Factory settings
ON
1 2 3 4 5 6 7 8
Set status output at local
or remote error
ON
1 2 3 4 5 6 7 8
S1
ON
1 2 3 4 5 6 7 8
Set status interface
at local fibre link error
(Not used in pp version)
ON
1 2 3 4 5 6 7 8
Multidrop end unit
(use chanal 1 for end unit,
not used in pp version)
ON
1 2 3 4 5 6 7 8
Multidrop unit, mid unit
(Not used in pp version)
ON
1 2 3 4 5 6 7 8
S2
ON
1 2 3 4 5 6 7 8
Redundant ring
(Not used in pp version)
Service request button
LED "A"
LED "B"
Service request button
Pressing this button generates service request messages from each side of the router.
The service button is used for installation in network management tool.