Maintenance and servicing
12
Maintenance and servicing
12.1
General
All maintenance, repair and modification work on the
WR 870
is only to be
carried out at a standstill and with the power supply disconnected or the
engine switched-off. The procedure described in the operating manual for
stopping the machine must be strictly adhered to.
The
WR 870
is to be checked to ensure it is in a safe condition and secured to
prevent it rolling away.
The safety regulations in chapter 4 apply.
Modification of or changes to the machine is/are only permitted after
consultation with the manufacturer. Original replacement parts and
manufacturer-authorised accessories are provided for safety. The use of
other parts releases the manufacturer from liability for the consequences
thereof.
Note before starting work:
Check for externally visible damage and defects! Immediately report
any changes (including those regarding operating behaviour) to the
responsible service personnel! If necessary, take the machine out of
service immediately!
Check the completeness and functionality of all accessories. Worn
parts, or those whose functionality has been impaired must be
replaced. Replacement parts must be ordered from the manufacturer.
Monitor the completeness and legibility of all type and information
labels as well as the operating manual. Replace missing or illegible
signs and documents.
Page
35
of
59
After each use, connect the WR 870 Battery to the charger
