30
9 Start-up
9.3.2 Cold start
P
Slide the throttle into the rearmost
position (choke).
P
START
9.3.3 Starting at operating temperature
P
Slide the throttle into the position
slightly above idle.
P
Between MIN and MAX
9.3.4 Starter cord
P
First pull the handle of the starter cord
lightly until resistance is felt: then pull
hard.
Please let the handle of the starter cord
run back slowly. This prevents damage to
the
engine.
9.3.5 After the cold start
P
If the engine was started with the aid of the
choke, set the throttle to the fastest or
maximum position as soon as it has warmed
up and is running evenly without choke.
Adjust the throttle to the desired engine
speed.
Optimal performance at full thrott-
le.
(Fig. 10 - Cold start controller)
(Fig. 11 - Operating temperature controller)
(Fig. 13 - Start operating temperature)
(Fig. 12 - Starter cord)
NOTICE
