23
7
Assembly, comissioning
7.1 Start preparation
Please check that the scraper is complete.
Please read the operating instructions with the associated setting instructions
before commissioning!
7.2 Adjustment of the handlebar and holder for the pusher
Mount the handlebar after delivery by attaching it with the screws (see
picture).
it is possible to loosen the screws at both lower sides of the handlebar
to adjust it forwards or backwards. Then tighten the screws again. After
that the brackets for the pusher must be attached to the machine (see
picture).
The lever is mounted on both sides from the inside, so that the angled
part is facing up. The pusher can then be pushed open (see page 24).
fastening screws
Bracket
for the pusher
(Fig. 2: Adjustment of handlebar)
