Westerbergs deluxe 2.0, User Manual

Page: 35 / 44

westerbergs spa
35
ENG
enjoy
Press the “Jets” button once to activate the pump in
circulation mode and again for massage mode. Press
the button again to stop the pump. If the pump is left
running, massage mode switches off automatically after
15 minutes and circulation mode after 4 hours. The
pump can also start up for 2 minutes every 30 minutes to
check the temperature and, if necessary, heat the water,
depending on the setting. When circulation mode has
started automatically (when filtering is activated), the
pump cannot be switched off from the panel; however,
massage mode can be switched on and off.
Press the “Light” button to switch on the
light and again to switch it off. If the light is
left on, it will be turned off automatically after
4 hours.
To display the set temperature, press the “Cool” or “Warm” but-
tons once. To increase the set temperature, press the “Warm”
button a second time before the display has stopped flashing.
The set temperature increases each time you press the button.
To lower the temperature, allow the display to return to showing
the current temperature (wait 3 seconds) and repeat the proce-
dure using the “Cool” button.