Section VES-R00-20A
030-101639 Rev. B
R
10
0802IARB
routings and cable connections, to perform any equipment
testing, to perform cable management and housekeeping in
preparation for closing the SwingRack, to close the arms of
the SwingRack, and to install and lock the front cover (if
provided).
4.
CUSTOMER & TECHNICAL SERVICES
4.1
Customer Service & Technical Assistance
If technical or customer assistance is required, contact Westell
by calling or using one of the following options:
Voice: (800) 377-8766
email:
Visit Westell’s World Wide Web site at http://www.Westell.com
for additional information about Westell.
4.2
Part Numbers
This equipment is identified by a product number
(A90-VESR00), which consists of three parts: the issue letter
of the equipment (A), the assembly type (90), and the specific
model number (VESR00). Each time a change is made to the
product which changes the form, fit, or function of the product,
the issue letter is incremented or advanced by one. Be sure to
indicate the issue level as well as the model number when mak-
ing inquiries about the equipment.
5.
WARRANTY & REPAIRS
5.1
Warranty
Westell warrants this product to be free of defects at the time
of shipment. Westell also warrants this product to be fully func-
tional for the time period specified by the terms and conditions
governing the sale of the product. Any attempt to repair or
modify the equipment by anyone other than an authorized
Westell representative will void the warranty.
5.2
Repair and Return
Westell will repair or replace any defective Westell equipment
without cost during the warranty period if the unit is defective
for any reason other than abuse, improper use, or improper
installation. To return defective equipment, first request a Re-
turn Material Authorization (RMA) number from Westell by
calling or using one of the options shown below. Once an RMA
number is obtained, return the defective unit (freight prepaid),
along with a brief problem description, to the address we will
provide to you when you contact us.
Voice: (630) 375-4211
email: [email protected]
Replacements will be shipped in the fastest manner consistent
with the urgency of the situation. Westell will continue to repair
or replace faulty equipment beyond the warranty period for a
nominal charge. Contact Westell for details.
6.
SPECIFICATIONS
6.1
Physical Specifications
The physical specifications are shown in Table 2.
Physical Feature
U.S.
Metric
Height
24.38 inches
62 cm
Width
(closed)
26.5 inches
67.3 cm
Depth
(closed, including lock)
6.38 inches
16.2 cm
Depth
(open)
18.5 inches
47 cm
Depth
(open, with D-ring installed)
21.6 inches
55 cm
Weight
(approx.)
24 pounds
10.9 Kilograms
Max. Load Weight
25 pounds
11.4 Kilograms
Operating Temperature
−40
°
to 149
°
F
-40
°
to 65
°
C
Humidity
5 to 95% (non-condensing)
For mounting hole spacings or dimensions, see Figure 6.
Table 2. Physical Specifications
6.2
Ordering Specifications
To order units, call the telephone number shown in Paragraph
4.1
and please specify a part number, as shown in Table 3.
Part #
Description
A90-VESR00
VirtualEdge
t
SwingRack 19/23" wall-mount equipment
rack. Includes a ground lug, a ground strap, 4 adapter ears,
6 internal-arm D-rings, and 2 external-arm 3" D-rings.
A90-VESR14
SVirtualEdge
t
SwingRack 19/23" wall-mount equipment
rack,
with additional fiber and cable management features
.
Includes a ground lug, a ground strap, 4 adapter ears, 5
internal-arm D-rings, a 2-piece fiber management spool,
two bend-radius protection boots, a cable race-way (duct),
a flexible fiber-cable protection tube, and a locking cover.
Optional Equipment*
A90-VECMRING3 Cable management D-Ring (Qty = 1)
Splice Tray Kit
A splice tray and two screws are available as a kit, mounts
inside the swing-arm.
A variety of optional equipment is available. Call Westell for details.
Table 3. Ordering and Option Information