Digital Repeater Line
DSP85 Series
WESTELL.COM
© 2016 Westell Technologies
14 June 2016 Doc. No. 960-1666-MNL rJ
1.877.844.4274
Page 43 of 77
When the Tera Term application opens, the window in Figure 4-11 displays.
Figure 4-11: Default IP Address
1.
Change the default host IP address to the IP address of the repeater to be controlled. In the case of a new
install, the default address is 192.168.1.100 and has been assigned at the factory.
a.
Select Service>Telnet. The TCP port must be 23.
2.
Click OK. The login screen, Figure 4-12, displays.
Figure 4-12: Login Screen
3.
Enter the username and password.
IMPORTANT
In dual-band units, each band is changed independently and requires an
independent login. The low band default username is bandone. The high band
default username is bandtwo. In the field after the prompt, enter the user name for
the band to be changed. The default password is csi1234 for both bands.
