Section BXM‐05V‐20A
030‐101643 Rev. B
R
10
1205IARB
modify the equipment by anyone other than an authorized
Westell representative will void the warranty.
6.2
Return and Replacement Policy
Westell will repair or replace any defective Westell equipment
without cost during the warranty period if the unit is defective
for any reason other than abuse, improper use, or improper
installation. Before returning the defective equipment, first re
quest a Return Material Authorization (RMA) number from
Westell. Once an RMA number is obtained, return the defec
tive unit, freight prepaid, and a brief problem description to:
Voice: (630) 375‐4457
email: [email protected]
Replacements will be shipped in the fastest manner consistent
with the urgency of the situation. Westell will continue to repair
or replace faulty equipment beyond the warranty period for a
nominal charge. Contact Westell for details.
‐
TL9000 RECYCLING NOTE
‐
Westell recommends that its products be recycled at the end of their product
life. For Westell products that have reached their product End Of Life
(EOL), please recycle and dispose of the products per your company prac-
tice, per local recycling programs and local codes, and per state statutes.
7.
SPECIFICATIONS
7.1
Physical Specifications
The Boxer
t
physical specifications are shown in Table 2.
7.2
Regulatory/Agency Specifications
The Boxer cabinet is designed to meet the following regulatory,
safety or environmental specifications or requirements:
S
NEMA 4 compliant
7.3
Ordering Specifications
To order units, call the telephone number shown in Paragraph
5.1
and specify a specific model number shown in Table 3.
Physical Feature
U.S.
Metric
Height
(including mounting brackets)
27 in.
68.58 cm
Height
(between
mounting holes)
25.2 in.
64 cm
Height
(cabinet only, exterior)
23 in.
58.42 cm
Width
(exterior)
14 in.
35.56 cm
Depth
(door closed)
18 in.
53.3 cm
Depth
(door open 90
_
)
29.11 in.
73.94 cm
Depth
(cabinet box only, approx.)
15.625 in.
39.69 cm
Weight
(empty, approx.)
20 lbs.
9.08 kg
Operating Temperature
(including solar loading)
‐40
°
to 149
°
F
‐40
°
to 65
°
C
Humidity
0 to 95% (non‐condensing)
Mounting*
H‐Frame, wall, pole or post
Table 2. Boxer Cabinet Physical Specifications
Part #
Description
A90‐BXM05V19‐NMT
Boxer
t
cabinet, no active cooling, with
single full‐size door, built‐in 5‐RU 19” rack,
door switch, and internal mesh back plate
Table 3. Ordering Information
