Section BXB‐5VA‐20A
030‐101799 Rev. A
R
12
1307IARA
Figure 19. Clean the Air Intake/Exhaust Vents or Louvers
Remove any debris
from all vents
dering information. Always disconnect power at the source
before removing the battery cable.
4.2
Inspection and Debris Removal
Westell
r
Boxer
t
battery box components are maintenance‐
free, however, at least once every six months, inspect Boxer to
remove any debris from the vents or louvers (Figure 19). This
facilitates proper operation of the cabinet and battery box and
allows unobstructed air flow.
5.
CUSTOMER & TECHNICAL SERVICES
5.1
Customer Service & Technical Assistance
If technical or customer assistance is required, contact Westell
by calling or using one of the following options:
Voice: (800) 377‐8766
email:
For additional information about Westell, visit the Westell
World Wide Web site at http://
5.2
Part Numbers
This equipment is identified by a part number
(A90‐BXB05V‐A), which consists of three parts: the equip
ment issue letter (A), the assembly type (90), and the model
number (BXB05V‐A). Each time a change is made to the prod
uct which changes the form, fit, or function of the product, the
issue letter is incremented by one. Be sure to indicate the issue
level as well as the model number when making inquiries about
the equipment.
Physical Feature
U.S.
Metric
Height
10 in.
25.40 cm
Width
(including vents)
14.25 in.
36.20 cm
Depth
15.00 in.
38.10 cm
Weight
(empty, approx.)
15 lbs.
6.81 kg
Weight Load
(Max.)*
35 lbs.
15.89 kg
Outside Operating Temp.
‐40
°
to 115
°
F
‐40
°
to 46
°
C
Internal cabinet Temp.
‐40
°
to 149
°
F
‐40
°
to 65
°
C
Humidity
0 to 95% (non‐condensing)
* Total weight of the battery box + bat conjoined Boxer‐5 cabinet and equipment
mounted in it should not exceed 97 pounds.
Table 1. Boxer Battery Box Physical Specifications
6.
WARRANTY & RETURNS
6.1
Warranty
Westell warrants this product to be defect‐free at shipment time.
Westell also warrants this product to be fully functional for the
time period specified by the terms and conditions governing the
sale of the product. Equipment repairs/modification attempts
by an unauthorized person will void the warranty.
6.2
Return and Replacement Policy
Westell will repair or replace any defective Westell equipment
without cost during the warranty period if the unit is defective
for any reason other than abuse, improper use, or improper
installation. To return defective equipment, first request a Re
turn Material Authorization (RMA) number from Westell by
calling or using one of the options shown below. Once an RMA
number is obtained, return the defective unit (freight prepaid),
along with a brief problem description, to the address we will
provide to you when you contact us.
Voice: (630) 375‐4211
email: [email protected]
Replacements will be shipped in the fastest manner consistent
with the urgency of the situation. Westell will continue to repair
or replace faulty equipment beyond the warranty period for a
nominal charge. Contact Westell for details.
7.
SPECIFICATIONS
7.1
Ordering Specifications
To order units, call the telephone number shown in Paragraph
5.1
and specify a specific model number shown in Table 3 and/
or Table 4.
7.2
Regulatory/Agency Specifications
The Westell
r
Boxer
t
battery box is designed to meet the fol
lowing regulatory, safety, or environmental specifications:
S
NEMA 3R
7.3
Physical Specifications
The physical specifications are shown in Table 1.
