Section BXM‐301‐10H‐20A
030‐101901 Rev. A
R
2
1608IARA
Figure 2.
Isometric Open View of Boxer‐30 Cabinet
Side lift ear with
2” hole
(not for permanent
mounting)
Door sensor
switch
Slotted groove in channel
adjustment bracket
Ground posts
Holes in rack
channel to mount
equipment
Convenience
outlet
3‐point
door latch
Power cord
access for
exchanger
electronics
Air exhaust
hole
Documentation
tray
AC duplex outlets
(inside)
Heat exchanger
Air intake
holes
Knock‐out
Wind latch
Top and bottom mounting brackets not shown
ÖÖÖ
ÖÖÖ
ÖÖÖ
ÖÖÖ
ÖÖÖ
ÖÖÖ
ÖÖÖ
ware must be capable of supporting the weight of the Boxer‐30
cabinet plus the weight of any equipment mounted in it. The
Boxer‐30 cabinet is typically located at the customer premises
but can be located anywhere a weather‐tight, outdoor cabinet
is required.
1.5
Product Features
Each Boxer‐30 cabinet comes fully assembled, pre‐wired,
tested, and ready for field‐provided customer equipment
installation, and includes the following features and capabili
ties.
S
NEMA 4 compliant
S
Weather‐tight cabinet
S
Actively cooled with heat exchanger
S
Dissipates up to 1800 watts
S
‐48VDC powered
S
Thermostat controlled heat exchanger
S
Rear‐access panel
S
Interior area provides 30 RUs of 19” rack mounting space
