2. When mounting heavier modifiers, we recommend positioning the yoke in the middle of the oval
mounting bracket. This will allow for the most secure positioning.
NOTE: The L60-B was designed for compatibility with various modifiers. However, the yoke’s positioning,
the modifier’s depth, the modifier’s weight & the location of the weight on the modifier could cause the
yoke to be unable to maintain the desired position.
L60-B COB: Attaching & Removing Modifiers
Connecting a Modifier
1. Ensure that the clear protective cover has been removed from the front of the L60-B by sliding
the modifier release toward the rear of the unit and turn the cover counterclockwise.
2. Ensure the COB is turned
OFF
and has cooled for five minutes.
3. Grasp the modifier and align the four square mounting blocks with the adapter openings located
on the face of the COB.
4. Insert the modifier and gently turn clockwise until it locks into place.
Removing a Modifier
1. Ensure the COB is turned
OFF
and has cooled for five minutes.
2. Securely grasp the modifier.
3. Slide the COB’s modifier release away from the modifier.
4. Rotate the modifier counterclockwise until the four square mounting blocks align with the
openings. Pull the modifier away from the COB to remove.
5. Reinstall the clear protective cover to protect the COB during storage and transport.
NOTE: Use caution when removing modifiers to avoid damaging the COB. Never force entry or removal
of modifiers.
L60-B COB: Controls
Adjusting the Light Output
1. Ensure that the L60-B is
ON
.
2. Rotate the
Dim•Bluetooth
control knob to adjust the intensity.
Adjusting the Color Temperature (Kelvin)
1. Ensure that the L60-B is
ON
.
2. Rotate the
CCT•FX
control knob to adjust the color temperature.
6
