11
Confidential
6
Management
The FlexStream product line core feature is manageability.
6.1
MX-GS200 LEDs
The LEDs represent the state of the hardware and software and can be used to assist in the device
installation as well as to monitor its status.
LED state
Description
Power Off
No power to device
Power LED:
Off: Power to the device is off
On: The device is powered on
Status LED:
Off: System is off or booting
On: System is running normally
Blinking: USB command stick is being processed
Mux LED:
Off: Mux has not initialized (booting or powered off)
On: Mux is receiving and transmitting packets with no errors
Blinking: Mux is oversubscribed or streams errors were detected
Only valid after Status LED is lit.
Modulator LED:
Off: USB modulator has not been detected.
On: USB modulator has been detected or a UDP modulator is in use.
Blinking: Error with modulator
Only valid after Status LED is lit.
6.2
Factory defaults
Factory defaults can be set by holding the mode switch down during reboot. (Not implemented in
release 1.11)
6.2.1
Web UI
The Web UI of the MX-GS200 is fundamentally self-explainable and changes with each release it is
therefore not documented in this user guide. The default user/password for the MX-GS200 is
administrator/admin.
6.3
Software updates
The FlexStream Multiplexer supports software updates via three methods.
Web UI
Web UI software updates
USB Command
Sticks
WPE will provide a script and update package. These two files are copied to the
root directory of a FAT32 formatted USB storage device. The storage device should
be inserted into a working unit. The Status LED will blink as the script is being
processed. When complete, LEDs will return to normal.
Summary of Contents for FlexStream MX-GS200
Page 5: ...5 Confidential Figure 1...