6
West Mountain Radio
Operating Manual
Specifications
Dimensions
5.5 x 4.3 x 2.5 inches
Power Requirements
9 to 16 Vdc; 1.1A typical before onset
of clipping
Audio Input
High impedance, 0.01 VAC
Voltage Gain
46 dB
Audio Output Power
7.5 watts RMS maximum into
8 ohms @ 13.8 VDC
Maximum Audio Output Voltage
7.75 Vrms
Input Clipping Level
0.04 volts RMS
Frequency Response
300 Hz to 3400 Hz
Noise Reduction Characteristics
Adaptive, single tone greater than 50 dB
Powerpole® is a registered trademark of
Anderson Power
Products
ClearSpeech Adaptive Speech Filter
The ClearSpeech Adaptive Speech Filter is an algorithm designed
to filter noise from audio signals containing both speech and noise.
It is implemented in a circuit board containing DSP circuitry and a
small audio power amplifier.
Immunity from RF Interference
CLRspkr contains circuitry to reduce interference from the
transmitted radio signal. There are filters on all input wires, and
decoupling capacitors at key points throughout the electronics.
There is a ferrite inductor in series with the positive power lead.
Audio input is via a coupling transformer. The audio input ground is
not connected to the power return. This helps reduce any ground
loops.