6
West Mountain Radio
Operating Manual
PC Utility
When connected to a PC, a COM port will appear at the PC. If one
does not appear (usually due to an older version of Windows) you will
need to install the WMR drivers. The USB drivers can be installed by
using the WMR Device Diagnostic Utility. This utility can be found on
the West Mountain Radio website under Support > Downloads
(www.westmountainradio.com/content.php?page=wmr-downloads)
The CLRmod PC Utility program
can be downloaded from the
aforementioned download page to
monitor and control the CLRmodule.
A hardware interface must be
provided to interface the 0-3.3V
signals on the CLRmodule to the PC
RS232 port or a USB port.
The CLRstereo has two
CLRmodules inside and it has a
USB interface connected to those
modules. This provides an easy-
to-use development platform for the
CLRmodule.
Hardware Development Tools
West Mountain Radio offers the
CLRmodule Development Board
(Sku #58413-1770)
. This is a bare
PCB that can be used to aid in
development. The PCB layout is
image to the right and schematic on
the following page.
