E - 15
6.
The radio reminds you that this is a permanent setting and asks you to confirm. To confirm the entry, press
PUSH-
EnTER
. The radio returns to the
Setup
menu.
OR
Press
CLR
to return to the MMSI edit screen.
group MMSI number
You can change the group MMSI number as often as you want. Follow the steps below to enter a group MMSI number into
the radio:
1.
Open the normal menu and choose the
Setup
sub-menu.
2.
Select
Group MMSI
. If one was entered
previously, the screen displays it.
3.
Group MMSI numbers always start with a
0, so that digit is already entered for you. Use the
PUSH/EnTER
knob to change the second digit; turn it clockwise to
increase the number or counter-clockwise to decrease it.
4.
When the second digit is correct, press
PUSH/EnTER
. The cursor moves to the next digit. Enter the remaining seven
digits of the MMSI number in the same way. If you make a mistake, press
CLR
to erase the wrong digit.
5.
When the ninth digit is correct, press
PUSH/EnTER
. The radio displays the new MMSI number and asks you to confirm.
6.
To save this MMSI number, select
Yes
and confirm the entry. To cancel this MMSI number, select
No
. The radio
returns to the
Setup
menu.
using the Directory
The directory lets you store up to 20 MMSI numbers of other stations so you can call them quickly. Follow the steps below to
edit MMSI numbers in your directory.
1.
Press
CALL-MEnU
to open the call menu,
and select
Directory
. The screen displays
any previously-entered MMSI numbers
and names.
2.
To add a new MMSI number to the
directory, select
[New]
.
3.
The radio prompts you to enter the
nine-digit MMSI number. Use the
PUSH/EnTER
knob to change the first digit; turn it clockwise to increase the number or
counter-clockwise to decrease it.
4.
When the first digit is correct, press
PUSH/EnTER
. The cursor moves to the next digit. Enter the remaining eight digits of
the MMSI number in the same way. If you make a mistake, press
CLR
to erase the wrong number.
5.
When the ninth digit is correct, press
PUSH/EnTER
.
6.
The radio prompts you to enter a name (up to 12 characters) for this MMSI number; the name displays in the directory
list. Turn the
PUSH/EnTER
knob to scroll through the available characters according to the following table:
Clockwise
Counter-clockwise
Capital letters (
A
through
Z
)
One blank space
Lower-case letters (
a
through
z
)
Numbers (
0
through
9
)
Punctuation (/ ‘ + -)
Punctuation (/ ‘ + -)
Numbers (
0
through
9
)
Lower-case letters (
a
through
z
)
One blank space
Capital letters (
A
through
Z
)
7.
When the first character is correct, press
PUSH/EnTER
. The cursor moves to the next character.
8.
Enter the rest of the 11 characters the same way. If the name is shorter than 12 characters, press and hold
PUSH/EnTER
to complete the name entry. (If you press and hold
PUSH/EnTER
without entering a name, the radio displays the MMSI
number in the directory list.)
9.
When you finish entering the name, the radio displays the new MMSI number and name and asks you to confirm. To
save this directory entry, select Yes; to cancel this directory entry, select No. The radio returns to the directory list.
0
0
_______
16
Group MMSI
Back[CLR] Forward[ENT]
Group MMSI
Setup
Press and hold -
16
MMSI
123456789
Name
KENT NEWMAN
Back[CLR]
Select[ENT]
[New]
Directory
Press -
