42
West Marine VHF250 Radio Owner’s Manual
code),
OFF
(to remove a previously associated CTCSS
code), or
EXIT
(to leave this option without taking any
action).
To associate a code with the chosen channel,
highlight
ON
then press
ENTER
. You next choose a
code number between 001 and 142.
Use
▲
or
▼
to change the
fi
rst blinking single digit on
the screen to either 0 or 1. Press
ENTER
to move to
the middle digit.
Use
▲
or
▼
to increment or decrement the middle
digit. If the
fi
rst digit is 0, then you can select a middle
number between 0 and 9. If the
fi
rst number is 1, then
only select a middle number value between 0 and 4
to avoid an error when your entry is complete as the
highest complete code is 142. Press
ENTER
. If you
decide you must change the
fi
rst digit, press
MENU
to
return to the
fi
rst digit.
Use
▲
or
▼
to change the third digit between 0 and
9. Press
ENTER
when done. The screen changes
back to
EXIT
and displays the Channel at the top
along with the chosen code number. When the screen
reverts to the operational screen, the CTCSS
OFF
message has been replaced by the code number.
Note
: CTCSS codes range between 1 and 142. If you set a
code number outside this range (for example 190), when you
press
ENTER
to set that number, an error tone sounds to tell
6.
7.
8.
9.
RTGUUVJGGPVGTMG[
VJGEJCTCEVGTVJGP
CTTQYMG[UVQUGNGEV
2TGUUVJG72QT&190
RTGUUVJGGPVGTMG[
VJGEJCTCEVGTVJGP
CTTQYMG[UVQUGNGEV
2TGUUVJG72QT&190