PA
GE 2 v
er 2 Fl
at S
er
ies - JUL
Y 2ND 2019
PEDAL LAYOUT, POWER SUPPLY & CABLE MANAGEMENT
Setup:
Pedals: use the supplied velcro and attach the pedals to the board in the order in which you want them. Connect known working patch
cables and then proceeed to power them.
Power: the power supply will sit alongside your pedals so arrangement is important to yeild maximum & optimum pedal spacing.
Depending on model power supply, a small riser may be necessary to elevate the power supply high enough to access the power port. A
dry run is always recommended prior to permanently fastening things down. Make sure everything powers up and works as expected.
Power Supply Riser:
Notice the power supply sitting high in the first image; it sits on a 1/2” block, elevating it so the power port is easily accessed.
If you need one of these, give a call in and we can arrange specifics for your power supply.
