35
LENGTH ADJUSTMENT
To adjust the length, hold the half-shafts next to each other in the
shortest working position and mark them.
Shorten inner and outer guard tubes equally.
Shorten inner and outer sliding profiles by the same
length as the guard tubes.
Round off all sharp edges and remove burrs.
Grease sliding profiles.
No other changes may be made to the P.T.O. drive shaft
and guard.
CHAINS
Chains must be fitted so as to allow sufficient
articulation of the shaft in all working positions.
Do not let the chains encircle the P.T.O. guard in use as this will
shorten the life of the P.T.O. guard.
The PTO drive shaft must not be suspended from
the chains! Please use the P.T.O. Support Hook provided.
PTO SHAFT OPERATION AND MAINTENANCE
Summary of Contents for CRX-410
